What shaft depth can a hydropower shaft gantry crane serve?

The lifting height can be customized according to project requirements, making it suitable for both standard and deep shaft construction projects.

What lifting capacities are available?

Depending on the project, lifting capacity can range from light-duty configurations to heavy-duty models exceeding 50 tons, with customized options available.

Should I choose a single girder or double girder shaft gantry crane?

Single girder cranes are suitable for lighter lifting requirements, while double girder cranes are commonly used for heavier loads, larger spans, and continuous construction operations.

Can the crane be customized for different hydropower projects?

Yes. Capacity, span, lifting height, duty class, power supply, and structural configuration can be customized according to shaft depth and site conditions.

Does WEIHUA provide installation and after-sales support?

Yes. WEIHUA provides technical consultation, installation guidance, commissioning support, and after-sales service for hydropower shaft gantry crane projects.

Козловой кран для гидроэнергетических шахт для глубокой выемки грунта.

Hydropower shaft gantry crane is designed for vertical lifting operations in deep shaft excavation of hydropower projects, handling materials, equipment, and muck transfer in confined underground environments. WEIHUA is a shaft gantry crane for deep shaft excavation manufacturer and supplier, providing tailored solutions for different shaft depths, load requirements, and site conditions. As a professional partner for gantry crane for hydropower shaft construction, we delivers reliable equipment with practical engineering adaptation, supporting efficient and stable operation in complex hydropower construction projects.

Важные Параметры

Lifting capacity: 20t-50t
Span: 10m-40m
Lifting height: 15m-30m
Working Class: A2 – A6

What Is a Hydropower Shaft Gantry Crane?

A hydropower shaft gantry crane is a vertical lifting system used in hydropower shaft construction, including penstock tunnels, surge shafts, and powerhouse access shafts. It is used for lifting and lowering heavy equipment, construction materials, and workers during excavation and lining work in underground shafts. Compared with general gantry cranes, it is designed for confined deep shaft environments and is often installed with shaft support structures, replacing traditional derricks or tower cranes to support vertical transport in hydropower underground construction.

For more information on the features of this equipment, see: Что такое козловой кран с вертикальным валом?

Типы

Working Process

Спецификация

Hydropower shaft gantry cranes are available in single girder and double girder configurations, allowing different lifting capacities and structural arrangements to match various shaft construction requirements.

Single Girder Hydropower Shaft Gantry Crane

For more information on the features of this equipment, see: What Is a Vertical Shaft Gantry Crane?The single girder design is suitable for light to medium-duty lifting tasks in hydropower shaft construction. It features a simpler structure, lower overall weight, and reduced installation requirements, making it suitable for projects with limited space and moderate lifting demands.

Lifting capacity: 5t~50t
Span: 18m~35m
Lifting height: 6m~12m
Working Class: A5~A6

Double Girder Hydropower Shaft Gantry Crane

The double girder design is used for heavier loads and more demanding shaft operations. It provides greater lifting capacity, higher structural rigidity, and improved stability during frequent lifting cycles, making it suitable for deep shaft excavation, large equipment handling, and long-term construction projects.

Lifting Capacity: 20t–70t
Span: 10m–40m
Lifting Height: 15m–30m
Working Class: A2–A6 (FEM M5–M6)

Принцип работы

Hydropower shaft gantry cranes use a vertical lifting system for deep shaft construction, connecting ground handling with controlled lifting inside the shaft.

1. Rail or foundation installation: Rails or a fixed base are installed around the shaft opening to support crane operation.

2. Gantry structure setup: The gantry frame is assembled across the shaft and connected to the hoisting system.

3. Hoisting system activation: Winches and wire ropes are engaged to provide controlled vertical lifting power.

4. Load preparation and lifting: Materials or equipment are secured to lifting hooks and raised or lowered into the shaft.

5. Vertical movement in the shaft: The load is guided along a controlled vertical path inside the shaft opening.

6. Placement and unloading:The load is positioned at the required level and released for construction use.

7. Return for next cycle: The system returns to the starting position to prepare for the next lifting operation.

The process follows a repeated cycle from setup to lifting and unloading, supporting continuous vertical transport in hydropower shaft construction. Learn more about how the equipment works: How Does a Vertical Shaft Gantry Crane Work?

Спецификация

Параметр	Спецификация
Грузоподъемность	50/5t–1000/100t
Double-Hook Capacity	2×25/5t–2×500/100t
Спам	10m–40m
Высота подъема	15m–30m (customizable for deep shafts)
Класс долга	A2–A6 (FEM M5–M6)
Main Hoisting Speed	0.8–7m/min
Скорость перемещения крана	3–30m/min
Скорость движения троллейбуса	2–20m/min
Блок питания	380V / 660V, 50Hz, 3 Phase
Protection Class	IP54
Motor Insulation Class	F
Working Temperature	от -20°C до +40°C
Тип балки	Однобалочный / Двухбалочный
Метод управления	Pendant Control / Radio Remote Control
Rail Type	Straight Rail / Curved Rail
Приложение	Hydropower Shaft Excavation, Material Handling, Equipment Installation
Custom Options	Capacity, Span, Lifting Height, Voltage, Duty Class

WEIHUA can customize lifting capacity, span, lifting height, duty class, power supply, control system, and structural configuration according to specific hydropower shaft project requirements. Please связаться с нами for a tailored solution.

Video

Приложения

Deep hydropower shaft construction involves frequent vertical lifting tasks across different stages of work. A shaft gantry crane is used to support material and equipment handling in confined shaft environments.

Application Scenario	Описание
Continuous muck hoisting after blasting	The mining vertical shaft gantry crane lifts blasted rock and soil from the shaft bottom to the surface for cyclic handling during excavation.
Precast shaft segment lowering and installation	It lowers and positions precast concrete shaft segments during shaft sinking and lining construction.
Supply of daily construction materials	It hoists drilling tools, support steel, pipelines, and shotcrete materials into and out of the deep shaft.
Large equipment hoisting for shaft bottom expansion	It lifts and transfers heavy equipment such as roadheaders and conveyor systems to the shaft bottom.
Temporary rescue and handling in construction	It handles recovery operations for fallen equipment or materials inside the shaft during construction.
Shaft inspection and maintenance access lifting	It lifts inspection personnel and maintenance tools for shaft checking and repair operations.

These scenarios cover the main lifting needs in shaft excavation and construction, showing how the crane is applied throughout the different phases of deep hydropower projects.

To learn more about the applications of gantry cranes, read the article: What Is a Gantry Crane Used For? Applications and Industries

Преимущества

Shaft gantry cranes are used in hydropower projects to handle heavy vertical lifting in deep, narrow shafts where precision and stability are required. A hydropower shaft gantry crane is better suited than general cranes for this type of confined underground work.

Hydropower shafts require the accurate lowering of heavy components like penstock sections and turbine parts. A shaft gantry crane for deep shaft excavation provides controlled vertical movement in a limited space.

Hydropower sites are often remote with complex terrain and weather conditions. Shaft gantry cranes use a modular steel structure for transport and installation in difficult locations.

Shaft construction includes excavation, lining, and installation stages. A lifting system supports multiple tasks within the same project without frequent equipment change.

Deep shaft lifting requires stable load control. Modern systems include protection functions and remote operation to reduce risk during lifting work.

Compared with multiple general cranes, shaft-specific lifting equipment reduces temporary structures and improves site efficiency in long-duration projects.

Hydropower shaft work involves frequent lifting of heavy components. A shaft gantry crane handles large loads in deep vertical conditions with stable operation.

Vertical lifting is a core part of hydropower shaft construction. A vertical shaft excavation crane solution supports stable and continuous material handling in deep shaft projects.

Structural Design

The structural design of a hydropower shaft gantry crane is developed around the lifting requirements and working conditions of deep shaft construction projects.

Box-type main girder: Welded box girder with rigid support legs, used for frequent heavy lifting in shaft construction.
Straight and curved rail use: Can run on straight or curved rails, depending on the shaft site layout.
Extended lifting coverage: Cantilever design can be added to increase the working range near the shaft opening.
Modular hoisting system: Hoist, motor, and drive units are designed in modules for easier maintenance and replacement.
Protected electrical system: Electrical parts are sealed for dust, moisture, and underground working conditions.

These structural features provide the foundation for stable lifting, reliable operation, and long-term use in hydropower shaft construction.

Gantry cranes must be inspected regularly during operation to ensure safe use. For a detailed inspection checklist, see the article: “Gantry Crane Inspection Checklist: Daily, Monthly, and Annual Inspection Guide.”

Technical Features

The technical features of a hydropower shaft gantry crane are configured to match different lifting requirements and operating conditions in shaft construction.

Adjustable configuration: Span, lifting height, and capacity set based on different shaft project needs.
Frequency control operation: Speed can be adjusted during lifting and travel for different load conditions.
Stable start and stop: Designed to reduce impact during frequent operation cycles on site.
Standard compliance design: Manufactured according to crane safety requirements for construction use.
Multiple construction uses: Applied in excavation, lining, and equipment installation in hydropower shafts.

These features support lifting, material handling, and installation work across different stages of hydropower shaft projects.

Customized Hydropower Shaft Gantry Crane Solution

Hydropower shaft gantry cranes are configured according to different project conditions, covering load, structure, and site requirements in shaft construction.

1. configuration design

Parameters set by shaft depth, opening size, and site conditions. Configured for 50t-class lifting based on project load requirements.

2. Corrosion protection

Surface treatment for salt spray, heat, and UV exposure. Hoisting and electrical systems sealed for underwater operation.

3. Span adjustment

Span 10m–40m based on shaft opening, with optional side cantilevers for wider coverage.

4. Lifting height configuration

Lifting height 15m–30m or higher, depending on shaft depth, with dual-hook options for deeper work.

5. Duty class selection

Duty class from A2 to A5–A6 based on operation frequency.

6. Power adaptation

Voltage and frequency matched to local grid standards.

7. Heavy-duty structure

A double girder structure ensures stability under large loads.

8. Application-based customization

Configured for different hydropower shafts such as penstock, surge, and access shafts.

9. Installation and site adaptation

Design adjusted for shaft opening space, foundation, and on-site assembly conditions.

10. Engineering support capability (WEIHUA)

WEIHUA provides design support and on-site guidance for hydropower shaft projects.

These customization options allow the crane to adapt to various hydropower shaft projects, supporting installation and operation across different site conditions.

For details on the price guide for gantry cranes, see the article: How Much Does a Gantry Crane Cost? Price Guide and Cost Factors

Дело

The Songyang pumped-storage hydropower station in Zhejiang involves an ultra-deep shaft project with a vertical depth of 637 meters. The construction site faces extremely complex underground conditions, including active fault zones, frequent water inflow, poor ventilation, and difficult muck removal. Conventional construction methods and standard lifting equipment are not suitable for these conditions, resulting in low efficiency, delayed data transmission, and high safety management challenges. They also cannot meet the requirements of multiple operations, such as surge shaft cleaning, tunnel boring machine assembly, and precise lifting of penstock sections.

Henan Weihua developed a customized 700-meter-class integrated intelligent lifting and handling system for this project. The solution is centered on an intelligent shaft gantry crane, integrated with full 5G communication coverage, ground-based remote control, unmanned underground operation, and a sensor system with over 100 monitoring points. The system enables continuous workflow from excavation and cleaning to precision lifting of equipment. It improves operational safety in harsh underground conditions, reduces labor demand, and increases overall construction efficiency by nearly ten times, setting a new benchmark for ultra-deep shaft construction in China

https://www.henanweihua.com/case/rubber-tyred-gantry-crane-rtg-for-remote-mining-and-logistics-hub-2

Choose WEIHUA Shaft Gantry Crane

WEIHUA shaft gantry cranes are designed for hydropower deep shaft construction, supporting stable lifting in excavation, lining, and equipment installation under complex underground conditions. We also offer custom solutions: Производитель и поставщик вертикальных шахтных козловых кранов для горнодобывающей промышленности.

Flexible configuration

Span, lifting height, and capacity can be adjusted based on shaft depth and site conditions.

Heavy-duty structure

Double girder design ensures stable operation under frequent and high-load lifting tasks.

Adaptable to harsh environments

Suitable for underground hydropower sites with humidity, dust, and temperature variations.

Strong customization capability

Designed according to project requirements, including different shaft types, loads, and construction stages.

After-sales service support

Provides installation guidance, commissioning support, and long-term technical service for project operation.

To learn about the factors that affect pricing and how to choose the right model, see the article: Gantry Crane for Sale: Types, Prices & Buying Guide (2026)

Вейхуа is a professional manufacturer and supplier of shaft gantry cranes, offering customized solutions and engineering support for hydropower projects. For project consultation, technical specifications, or a tailored hydropower shaft gantry crane solution, please contact our team. We will provide recommendations based on your shaft depth, lifting requirements, and site conditions.

Послепродажное обслуживание

Weihua, основанная в 1988 году, превратилась в мирового лидера в области интеллектуального производства Китая. Мы специализируемся на исследованиях, разработках и производстве умных кранов, а также предлагаем решения для AGV. Наши профессиональные команды инженеров, по доставке и послепродажному обслуживанию предоставляют комплексную техническую поддержку, индивидуальные решения, руководство по установке на месте и оперативное глобальное обслуживание, чтобы обеспечить безопасную и эффективную работу каждого проекта.

Глобальная команда технической поддержки

Удаленное руководство, ввод в эксплуатацию на месте и обучение операторов для обеспечения оперативного развертывания оборудования.

Свяжитесь с нами

Комплексная система запасных частей и цепочек поставок

Поддержание долгосрочных запасов критически важных компонентов для обеспечения быстрой доставки и устойчивого технического обслуживания.

Свяжитесь с нами

Единая служба послепродажного обслуживания

Предоставление комплексной профессиональной поддержки от установки и ввода в эксплуатацию до модернизации и устранения неполадок.

Свяжитесь с нами

Регулярные программы осмотра и технического обслуживания

Оснащение клиентов руководствами по техническому обслуживанию для продления срока службы кранов и снижения частоты отказов.

Свяжитесь с нами

Ищете надежного производителя кранов? Weihua станет вашим доверенным партнером! Не стесняйтесь обращаться к нам в любое время, чтобы обсудить требования вашего проекта, получить техническую консультацию от нашей профессиональной инженерной команды и запросить индивидуальное ценовое предложение. Позвольте Weihua использовать свои проверенные производственные мощности и комплексную систему обслуживания для предоставления эффективных и безопасных крановых решений, которые повысят эффективность работы и обеспечат успех вашего проекта!

Часто задаваемые вопросы

What is a hydropower shaft gantry crane?: A hydropower shaft gantry crane is a lifting system used in hydropower shaft construction for handling materials, equipment, and construction components during excavation and installation work.

What shaft depth can a hydropower shaft gantry crane serve?: The lifting height can be customized according to project requirements, making it suitable for both standard and deep shaft construction projects.

What lifting capacities are available?: Depending on the project, lifting capacity can range from light-duty configurations to heavy-duty models exceeding 50 tons, with customized options available.

Should I choose a single girder or double girder shaft gantry crane?: Single girder cranes are suitable for lighter lifting requirements, while double girder cranes are commonly used for heavier loads, larger spans, and continuous construction operations.

Can the crane be customized for different hydropower projects?: Yes. Capacity, span, lifting height, duty class, power supply, and structural configuration can be customized according to shaft depth and site conditions.

Настройте свои подъемные решения

Свяжитесь с нами сейчас по электронной почте: [email protected], или заполните форму ниже.

Пожалуйста, укажите ваше требование, ссылаясь на следующие аспекты:

Какой кран вам нужен?
Какова максимальная грузоподъемность (в тоннах), требуемая для вашего проекта?
Могли бы вы уточнить необходимую высоту подъема (в метрах)?
Можете ли вы предоставить детали о рабочей среде, такие как состояние грунта, ограничения по пространству и препятствия?
Какова ожидаемая частота использования и продолжительность проекта?

Козловой кран для гидроэнергетических шахт для глубокой выемки грунта.

What Is a Hydropower Shaft Gantry Crane?

Single Girder Hydropower Shaft Gantry Crane

Double Girder Hydropower Shaft Gantry Crane

Принцип работы

Спецификация

Video

Приложения

Преимущества

Structural Design

Technical Features