Гидравлическая лебедка

What Is a Hydraulic Winch?

A hydraulic winch is a powered mechanical device that converts hydraulic energy into rotational force to wind a steel wire rope onto a drum, generating the pulling or lifting force required to move, anchor, or position heavy loads. The hydraulic motor receives pressurized fluid from an external hydraulic power unit (HPU) or the host machine’s existing hydraulic system, eliminating the need for a separate electrical power supply at the winch location.

The defining characteristics of a hydraulic winch — compared to an electric winch of equivalent rated capacity — are its ability to operate at full torque from zero speed, sustain continuous duty cycles without overheating, maintain precise control at very low line speeds, and stall safely under overload without mechanical damage. These properties make the hydraulic winch the standard solution for marine mooring and anchor handling, offshore platform operations, mining haulage, oilfield pipe-laying, and heavy construction work where electric power is unavailable, unreliable, or insufficient.

The term hydraulic winches refers to the broader product family covering all capacity ranges, mounting configurations, and application types. Whether the application requires a compact 1 t mooring winch or a 100 t offshore towing winch, the core operating principle — hydraulic motor driving a geared drum through a fail-safe brake — is consistent across the full product range of hydraulic winches available from Вэйхуа.

Типы

Детали

Принцип работы

Weihua hydraulic winches are classified by drum structure. Selecting the correct configuration depends on the number of independent rope lines required, the need for synchronized lifting, and the total load capacity of the application.

Single-Drum Hydraulic Winch

A single-drum hydraulic winch uses one drum driven by a hydraulic motor to wind and unwind a single wire rope for lifting or pulling operations. The overall structure is straightforward, controls are simple, and the unit is easy to install and maintain. Single-drum hydraulic winches cover the full capacity range from 1 t to 100 t and are the standard configuration for the majority of marine, construction, mining, and industrial traction applications.

Typical applications: Ship mooring and anchor handling, construction site pulling, inclined shaft haulage, offshore deck winches, pipeline and cable laying.

Отправить запрос 

Двухбарабанная гидравлическая лебедка

A double-drum hydraulic winch is equipped with two independent or mechanically interlinked drum systems, each driven by its own hydraulic motor or by a shared drive with clutch separation. The two drums can operate synchronously — for balanced lifting of a single load across two rope lines — or independently, controlling two separate loads or rope paths simultaneously. Compared to a single-drum configuration, the double-drum hydraulic winch provides greater total lifting capacity, effective load balancing across the lift points, and more precise control in multi-point lifting and positioning operations.

Typical applications: Heavy marine crane hoisting systems, offshore platform equipment handling requiring balanced two-point lift, large ship mooring systems with independent fore and aft lines, synchronized cable-laying operations.

Отправить запрос 

Key Components of a Hydraulic Winch

• Drum — The wire rope drum is the core load-bearing element of the hydraulic winch, precision-machined with helical grooves to guide the wire rope in orderly, layer-by-layer winding. Drum diameter and length are sized to the specified wire rope diameter and total rope capacity of each winch model.
• Reducer and Brake — A multi-stage gear reducer converts the high-speed, low-torque output of the hydraulic motor into the low-speed, high-torque drive required to rotate the drum under full rated load. The spring-applied brake is integrated into the reducer assembly and engages automatically when hydraulic pressure is removed, locking the drum and holding the load securely at any position without power.
• Hydraulic Motor — Converts pressurized hydraulic fluid from the pump into rotational mechanical energy to drive the reducer and drum. Motor displacement is matched to the required pulling force and line speed of each winch model, delivering full rated torque from zero speed.
• Hydraulic Pump — Supplies pressurized hydraulic fluid to the motor and control system. The pump draws from the hydraulic oil tank and builds system pressure to the working pressure of the winch model (140–315 bar). The pump may be part of a dedicated hydraulic power unit supplied with the winch or integrated into the host machine’s existing hydraulic system.
• Система управления — The hydraulic control valve block manages fluid direction, pressure, and flow to the motor, providing pay-in/pay-out direction control, load-limiting pressure relief, and stepless speed regulation through flow control. The control system interfaces with the operator pendant, remote control, or PLC for manual, semi-automated, or fully automated operation.
• Frame — The welded structural steel base frame carries all winch components and transmits the full static and dynamic loads generated during operation to the mounting structure. Frame geometry is designed for the specified mounting configuration — base plate, flange mount, or integrated deck mount — and is finished with a corrosion-resistant coating system suited to the operating environment.

Working Principle of a Hydraulic Winch

Step 1 — Hydraulic Power Supply The hydraulic power unit starts and builds system pressure to the working pressure specified for the winch model (140–315 bar depending on capacity). Pressurized hydraulic fluid is routed through the control valve block to the hydraulic motor.

Step 2 — Operator Command & Valve Actuation The operator commands pay-in (drum wind) or pay-out (drum unwind) via the pendant control or remote system. The directional control valve in the valve block shifts, routing pressurized fluid to the appropriate port of the hydraulic motor and returning low-pressure fluid to the tank.

Step 3 — Brake Release When the directional valve opens and system pressure builds, a pilot signal releases the spring-applied brake, allowing the drum to rotate. The brake remains released for as long as the operator holds the command and system pressure is maintained.

Step 4 — Motor Drive & Torque Transmission High-pressure fluid drives the hydraulic motor, generating rotational torque. The gearbox reduces motor speed and multiplies torque at the drum shaft, providing the pulling force required to wind the wire rope and lift or pull the rated load at the specified line speed.

Step 5 — Speed Control The operator adjusts the flow control valve opening to vary the hydraulic fluid flow rate to the motor, providing stepless (infinite) speed control from near-zero to maximum line speed. Unlike an electric winch, which requires a variable frequency drive for speed control, the hydraulic winch achieves full stepless control through the hydraulic valve alone, maintaining full torque output at any speed including very low speeds.

Step 6 — Load Holding & Brake Engagement When the operator releases the control, the directional valve closes, motor rotation stops, and the spring-applied brake immediately clamps the drum. The load is held securely at its current position with no drift, and no hydraulic power is required to maintain the hold. In the event of hydraulic pressure loss, the brake engages automatically and the load remains locked.

Step 7 — Overload Protection If the wire rope tension exceeds the winch’s rated pulling capacity — due to a snagged load or unexpected resistance — the pressure relief valve in the hydraulic circuit opens, limiting system pressure and preventing damage to the motor, gearbox, drum, and wire rope. The winch stalls safely without overheating or mechanical failure, a key advantage over electric winches in overload conditions.

Key Features & Benefits

• High Pulling Capacity — Hydraulic drive delivers high torque in a compact, lightweight package. Hydraulic winches achieve pulling capacities from 1 t to 100 t with significantly lower unit weight than equivalent electric winch designs.
• Stepless Speed Control — Full variable speed from near-zero to maximum line speed through hydraulic flow control, with no additional variable frequency drive required. Precise speed control at very low line speeds enables accurate load positioning and controlled lowering.
• Full Torque at Zero Speed — Hydraulic motors deliver rated torque from standstill, allowing the winch to start under full load without current surge or thermal stress on the drive system.
• Continuous Duty Operation — Hydraulic systems dissipate heat efficiently through the oil circuit and tank. Hydraulic winches can sustain continuous operation at rated load without the duty cycle limitations that apply to electric motors.
• Fail-Safe Spring-Applied Brake — The drum is locked automatically on pressure loss, valve closure, or system shutdown. No electrical power or separate brake actuator is required to hold the load.
• Inherent Overload Protection — System pressure is limited by the hydraulic relief valve. Overload conditions cause the winch to stall safely rather than driving the rope or structure to failure, protecting both the winch and the load.

Технические характеристики

Standard Hydraulic Winch Specifications

Hydraulic Winch vs Electric Winch

Choosing between a hydraulic winch and an electric winch depends on the application’s load, duty cycle, environment, and available power infrastructure. The table below covers the primary decision factors.

For applications in standard indoor industrial environments with reliable electrical supply and moderate duty cycles, an electric winch is often the simpler and more economical choice. For heavy loads, continuous duty, marine and offshore service, hazardous areas, or where electrical power is unavailable, a hydraulic winch is the correct solution.

Applicable Industries

• Marine & Offshore — Mooring, anchor handling, towing, and deck lifting on ships, offshore platforms, and port terminals. Marine hydraulic winches operate continuously in salt air, moisture, and variable temperature conditions.
• Oil & Gas — Wellhead equipment handling, pipeline laying, and platform maintenance in Zone 1 and Zone 2 classified hazardous areas. Hydraulic winches require no electrical components at the winch head, making them the preferred lifting and pulling solution in flammable gas atmospheres.
• Mining — Inclined shaft haulage, man-riding hoists, and underground material transport. Mining hydraulic winches provide the continuous duty, reliable braking, and controlled low-speed operation required for safe underground operation.
• Construction — Site lifting and pulling operations where no fixed electrical supply is available. Construction hydraulic winches integrate with excavator or crane hydraulic systems for immediate deployment on any job site.
• Port & Terminal — Ship mooring and positioning, container handling equipment, lock gate and dock gate operation. Port hydraulic winches are specified for high cycle rates and exposure to water and marine atmosphere.
• Forestry & Logging — Timber extraction and cable logging on slopes and in terrain inaccessible to wheeled vehicles. Hydraulic winches integrate with forestry machinery hydraulic systems for self-contained operation.
• Military & Defense — Vehicle recovery, field engineering, and tactical logistics equipment. Military hydraulic winches are designed for extreme temperature ranges, rough handling, and operation without fixed infrastructure.

How to Choose a Hydraulic Winch

1. Rated Pulling Capacity The rated pulling capacity of a hydraulic winch is specified at the first layer of rope on the drum. As rope builds up on the drum in multiple layers, the effective drum radius increases and the pulling force decreases. If your application requires the full rated capacity at the end of a long rope run, confirm the multi-layer performance with our engineering team and select a model with sufficient first-layer capacity.

2. Wire Rope Diameter and Drum Capacity Rope diameter must be matched to the rated pulling capacity and the minimum breaking load of the rope selected. Drum capacity (in meters) must be sufficient to cover the full rope travel required by the application, including any dead wraps retained on the drum at maximum pay-out.

3. Line Speed Requirement Line speed affects both operational productivity and the hydraulic flow rate required from the HPU. Higher line speeds require greater hydraulic flow. Confirm that the HPU or host hydraulic system can supply the required flow at the working pressure of the selected winch model.

4. Working Pressure and HPU Compatibility Hydraulic winch models are designed to operate within a specific working pressure range (140–315 bar). The HPU must supply pressure within this range at the required flow rate. If integrating the winch into an existing machine hydraulic system, confirm that system pressure and available flow are compatible with the winch specification before ordering.

5. Mounting Configuration Hydraulic winches are available in base-plate (horizontal), flange-mount, and vertical drum configurations. Confirm the available mounting space, deck loading capacity, and required rope lead direction before specifying the mounting arrangement.

6. Certification Requirements Marine applications require classification society certification (ABS, CCS, DNV, BV, or LR depending on vessel flag state). Offshore and hazardous area applications may require ATEX or IECEx explosion-proof certification for the HPU and control system. Mining applications require Mine Safety Certification. Specify the required certifications at the time of inquiry to ensure the correct documentation is provided with delivery.

Certifications & Standards

Classification society and explosion-proof certification is available on request for applicable models. Certification documentation is provided with delivery and supports vessel class surveys, facility compliance audits, and regulatory inspections.

About Weihua Hydraulic Winches

Weihua is a professional hydraulic winch manufacturer and supplier based in China, with over 37 years of experience in lifting and traction equipment design and manufacturing. All Weihua hydraulic winches are produced under a rigorous quality management system certified to ISO 9001, and every unit is CE-marked in compliance with the European Machinery Directive.

Weihua provides a global after-sales service network, a one-year product warranty, and long-term spare parts availability for all hydraulic winch models. Our engineering team supports custom winch specifications, hydraulic system integration, and on-site installation and commissioning for marine, offshore, mining, and construction projects worldwide.

We also offer a comprehensive range of lifting and material handling equipment, including electric winches, overhead cranes, gantry cranes, and wire rope hoists. Contact our engineering team today for a customized hydraulic winch solution — or browse our full range of hydraulic winches for sale and request a quotation directly.

Послепродажное обслуживание

Weihua, основанная в 1988 году, превратилась в мирового лидера в области интеллектуального производства Китая. Мы специализируемся на исследованиях, разработках и производстве умных кранов, а также предлагаем решения для AGV. Наши профессиональные команды инженеров, по доставке и послепродажному обслуживанию предоставляют комплексную техническую поддержку, индивидуальные решения, руководство по установке на месте и оперативное глобальное обслуживание, чтобы обеспечить безопасную и эффективную работу каждого проекта.

Часто задаваемые вопросы

Настройте свои подъемные решения

Свяжитесь с нами сейчас по электронной почте: [email protected], или заполните форму ниже.