Since 1988
Export
170
+
Exporting countries
Strength
3420
K
Square Meter Factory
Team
1000
R&D engineers team
An electromagnetic overhead crane lifts ferrous steel with a lifting magnet instead of slings, but scrap and coils need different setups. Scrap suits a round magnet on a high-duty crane, while coils need a closer look at surface finish and grade before a magnet is the right tool. Most buyers get stuck on the same few questions. Can one crane handle both materials? Is a magnet safe on a coil? Should loose scrap go on a magnet or a grab? And why does the magnet’s pickup weight differ from the crane’s rated load? This guide answers them in order: scrap first, then coils, then how to specify the crane and magnet, and finally what to check with a supplier. Quick Reference: Scrap vs. Steel Coil Loose scrap Steel coil Common magnet Round electromagnet Rectangular or beam-type Main concern Wear, impact, high frequency Surface damage, coil grade Alternative tool Grab bucket C-hook or coil grab Typical setting Scrap yard, furnace feed Coil storage, finishing mill Weihua’s QC Electromagnetic Overhead Crane covers both, in standard capacities of 5–50 t with larger sizes…
Selecting the right wind turbine manufacturing crane is not a single decision — it is a series of decisions made workshop by workshop, because tower section rolling, blade mould handling, nacelle assembly, and yard logistics each require a fundamentally different crane configuration. The dominant types are heavy-duty double-girder overhead cranes for indoor production, large-span gantry cranes and straddle carriers for outdoor yard operations, and in some cases multi-hoist goliath systems for final tower closing. Getting the type wrong — or specifying the right type at the wrong duty class — creates production bottlenecks that are expensive to fix once a building is commissioned. What complicates procurement is that a single wind turbine component plant can require three or four distinct crane configurations under one roof. The workshop that rolls and welds tower sections has a completely different lifting profile from the nacelle assembly bay next door. This guide walks through each major production stage, identifies which crane type fits that stage, and explains the key specifications to verify before you commit to a purchase order. Why Wind Turbine Manufacturing Places…